The Hellberg Windshield for Boom Microphone 16999-001 is a replacement foam cover designed for compatible Hellberg boom microphones.

It helps reduce wind noise during outdoor use while also helping keep the microphone clean and hygienic. This makes it a useful replacement part for workers using electronic hearing protection with boom microphone communication in construction, forestry, industrial, utility, landscaping, and other exposed work environments.

Helps Reduce Wind Noise

Boom microphones are often used in noisy and outdoor environments where clear communication matters. Wind can interfere with speech pickup and make communication less clear.

This foam windshield helps reduce wind disturbance around the microphone, supporting more practical use in windy or open jobsite conditions.

Keeps the Microphone Cleaner

Because the windshield fits over the boom microphone, it also helps protect the microphone from dirt, dust, moisture exposure, and daily contact. Replacing worn or dirty foam covers can help keep shared or frequently used communication headsets more hygienic.

Simple Fit-Over Installation

Installation is straightforward. Fit the foam cover directly over the boom microphone.

Replace the windshield when the original cover becomes worn, loose, dirty, damaged, or missing.

Compatible Use

Designed for:

• Compatible Hellberg boom microphones
• Hellberg electronic hearing protectors using boom microphone communication
• Replacement setups requiring Hellberg part 16999-001

Confirm compatibility with your specific Hellberg model before ordering.

The post Hellberg Windshield for Boom Microphone – 16999-001 appeared first on Hellberg Sales and Service.

The Hellberg Windshields for Active Listening Microphones 1059-001 are replacement foam microphone covers designed for compatible Hellberg electronic hearing protectors with active listening microphones.

They help reduce wind noise and disturbance when working outdoors, making them a practical accessory for job sites, forestry, landscaping, road work, utilities, construction, and other exposed environments.

Helps Reduce Wind Noise Outdoors

Active listening microphones are useful for situational awareness, communication, and hearing important surrounding sounds while still wearing hearing protection. In windy conditions, microphone performance can be affected by wind noise.

These foam windshields help reduce that disturbance, making outdoor use more comfortable and practical.

Easy Adhesive Installation

The windshields are designed for simple installation. Remove the adhesive cover and place the foam windshield directly over the active listening microphone.

This makes them a straightforward replacement part when the original microphone windshields are worn, missing, dirty, or damaged.

Useful Spare for Crews and Safety Kits

For teams using Hellberg electronic hearing protection outdoors, spare microphone windshields are worth keeping on hand. They are small, easy to store, and help maintain day-to-day usability in changing weather and worksite conditions.

Compatible Use

Designed for:

• Hellberg electronic hearing protectors with active listening microphones
• Hellberg active listening microphone setups requiring replacement windshields

Confirm compatibility with your specific Hellberg model before ordering.

The post Hellberg Windshields for Active Listening Microphones – 1059-001 appeared first on Hellberg Sales and Service.

The Hellberg Spare Headband Passives 26046-914 is a replacement headband part designed for Hellberg Secure passive hearing protectors.

This spare part is useful when the original headband becomes worn, damaged, cracked, bent, or loose. Instead of replacing the full hearing protector, this replacement headband helps extend the service life of compatible Hellberg Secure passive earmuffs.

Restore Proper Fit and Positioning

A secure headband helps keep earmuff cups correctly positioned over the ears. When a headband is damaged or weakened, the hearing protector may not sit properly, which can affect comfort, seal, and everyday usability.

Replacing the headband helps restore the structure and stability of compatible Hellberg Secure passive hearing protectors.

Practical Spare Part for Worksites

For safety departments, maintenance teams, industrial shops, and crews using Hellberg hearing protection, spare parts can help reduce equipment downtime and keep PPE in service longer.

The 26046-914 Spare Headband Passives is a useful replacement part to keep available for crews using Hellberg Secure passive hearing protectors.

Compatible Use

Designed for:

• Hellberg Secure passive hearing protectors
• Headband-style Hellberg passive earmuffs requiring replacement headband part 26046-914

Confirm compatibility with your specific Hellberg model before ordering.

The post Hellberg Spare Headband for Secure Passive Hearing Protectors – 26046-914 appeared first on Hellberg Sales and Service.

The Hellberg Spare Helmet Arms 26108-910 are replacement arms for helmet-mounted Hellberg hearing protectors.

Designed for use with Hellberg passive and electronic hearing protection, these spare helmet arms help maintain a secure connection between the hearing protector and compatible helmet attachment system.

They are a practical replacement part when original helmet arms are worn, damaged, loose, or no longer holding the earmuffs in the correct working position.

Restore Helmet-Mounted Hearing Protection

Helmet-mounted hearing protectors rely on secure arms to keep the ear cups properly positioned. If the arms are damaged or weakened, the hearing protector may not sit correctly over the ears, which can affect comfort, seal, and day-to-day usability.

Replacing worn helmet arms helps keep your Hellberg hearing protection fitting properly and ready for work.

Useful Spare Part for Worksites and Safety Departments

For crews using helmet-mounted hearing protection, spare parts help reduce downtime and extend the life of PPE equipment.

The 26108-910 Spare Helmet Arm pair is a useful item to keep in maintenance rooms, service kits, jobsite PPE areas, and fleet safety supplies.

Compatible Use

Designed for:

• Hellberg passive hearing protectors
• Hellberg electronic hearing protectors
• Helmet-mounted Hellberg hearing protection setups requiring replacement helmet arms

Confirm compatibility with your specific Hellberg model before ordering.

The post Hellberg Spare Helmet Arms for Hearing Protectors – Pair – 26108-910 appeared first on Hellberg Sales and Service.

The Hellberg 3.5 mm Stereo Connection Cable 39922-001 is an audio accessory for compatible Hellberg electronic hearing protectors with a 3.5 mm AUX input.

It is designed for connecting external sound sources, including music players and compatible two-way communication radios, directly to your Hellberg hearing protection.

Connect External Audio Sources

This cable allows users to route audio from compatible external devices into their Hellberg electronic hearing protectors. It is a practical accessory for workers who need a wired audio connection in loud environments where hearing protection is still required.

Common uses include:

• Music players
• Compatible two-way communication radios
• External audio devices with a 3.5 mm output
• Jobsite or shop communication setups

3.5 mm Stereo Plug on Both Ends

The cable features a 3.5 mm stereo plug at each end, making it simple to connect a compatible external audio source to a Hellberg electronic hearing protector with a matching AUX input.

Useful Spare for Work Crews

Audio cables can get lost, damaged, or left in vehicles and equipment rooms. Keeping an extra Hellberg 3.5 mm stereo cable on hand is useful for crews, shops, and safety departments using Hellberg electronic hearing protection.

Compatible Use

Designed for:

• Hellberg electronic hearing protectors with a 3.5 mm AUX input

Because compatibility depends on the hearing protector model and input connection, confirm your model has a 3.5 mm AUX input before ordering.

The post Hellberg 3.5 mm Stereo Connection Cable for Electronic Hearing Protectors – 39922-001 appeared first on Hellberg Sales and Service.

The Hellberg Spare Headband Electronics 26046-915 is a replacement headband part designed for Hellberg electronic hearing protectors.

This spare part is useful when the original headband becomes worn, damaged, or no longer provides the fit and stability needed for daily use. Instead of replacing the full hearing protector, this replacement headband can help extend the service life of compatible Hellberg electronic models.

Restore Fit, Comfort, and Stability

A secure headband is important for keeping hearing protection properly positioned over the ears. If the headband is bent, cracked, loose, or damaged, the earmuffs may not sit correctly, which can affect comfort and protection.

This replacement headband helps restore the structure and fit of compatible Hellberg electronic hearing protectors.

Practical Replacement Part for Work Crews

For shops, job sites, fleet operations, and safety departments, keeping spare parts available can reduce downtime and help maintain PPE equipment longer.

The 26046-915 spare headband is a simple accessory to keep on hand for teams using Hellberg electronic hearing protection.

Compatible Use

Designed for:

• Hellberg electronic hearing protectors
• Headband-style electronic models requiring replacement headband part 26046-915

Because compatibility may vary by model, confirm the part number before ordering.

The post Hellberg Spare Headband for Electronic Hearing Protectors – 26046-915 appeared first on Hellberg Sales and Service.

The Hellberg USB Charging Cable is a replacement charging accessory for compatible Hellberg electronic hearing protection models, including the Xstream and Synergy series.

Whether you need a spare cable for the shop, jobsite, vehicle, or charging station, this cable helps keep your Hellberg hearing protectors powered and ready for daily use.

Simple 5V USB Charging

This cable is designed to connect to a standard 5V USB power source. It can also be used with a compatible mobile phone wall adapter, making it easy to charge your hearing protectors from common USB charging setups.

Ideal as a Spare or Replacement Cable

Charging cables are easy to misplace, damage, or leave behind on busy worksites. Keeping an extra Hellberg USB charging cable on hand helps reduce downtime and ensures your electronic hearing protection is ready when you need it.

Compatible Hellberg Products

Designed for use with:

• Hellberg Xstream hearing protectors
• Hellberg Synergy hearing protectors

Best For

• Replacement charging cable needs
• Spare charging stations
• Jobsite PPE rooms
• Fleet and crew hearing protection setups
• Xstream and Synergy users who need an extra cable

The post Hellberg USB Charging Cable for Xstream & Synergy Hearing Protectors – 39926-001 appeared first on Hellberg Sales and Service.

The Hellberg ComfortPad Gel Cushions are replacement ear cushions designed to improve comfort, fit, and seal performance on compatible Hellberg hearing protectors. Built with a soft silicone gel filling and a flexible polyurethane surface, these cushions help reduce pressure during long workdays while maintaining a dependable seal around the ear.

They are a practical upgrade for workers who wear hearing protection for extended periods, especially in construction, industrial, forestry, manufacturing, equipment operation, and other high-noise environments.

Comfortable Fit for Long Workdays

Standard ear cushions can become warm or uncomfortable during extended use. Hellberg ComfortPad Gel Cushions are designed to feel cooler and softer against the skin, making them a strong choice for all-day wear.

The gel-filled cushion adapts to the shape of the user’s face, helping reduce pressure points while supporting consistent hearing protection performance.

Better Seal With Safety Glasses

Many workers wear hearing protection together with safety glasses, face protection, or helmet-mounted PPE. These gel cushions are flexible enough to seal well around eyewear arms, helping reduce the gaps that can occur with stiffer standard cushions.

That makes them especially useful for job sites where hearing protection and eye protection are worn together throughout the day.

Easy Replacement Accessory

The ComfortPad Gel Cushions install in the same general way as regular Hellberg ear cushions, making them a simple replacement or comfort upgrade for compatible models.

Replace worn, damaged, compressed, or uncomfortable cushions to help keep your hearing protection fitting properly and performing as intended.

Compatible Hellberg Models

Approved for use with:

• Hellberg Xstream
• Hellberg Xstream LD
• Hellberg Xstream MP
• Hellberg Local 446
• Hellberg Local 2
• Hellberg Synergy DR

The post Hellberg ComfortPad Gel Cushions – Replacement Gel Ear Cushions – 99404-001 appeared first on Hellberg Sales and Service.

Product Details

• Black ABS plastic
• 75mm X 40mm (3” X 1.6”)
• Weight: 18g (0.6 oz)

The post ORBIS® Bracket for Safety Lights (ORBIS-LB-25) appeared first on Hellberg Sales and Service.

Product Details

• Size: 70mm X 32mm X 36mm (2.8”X1.3”X1.4”)
• Weight: 33.5g (1.2 oz) (Without Batteries)
• Batteries: 2 X (AAA)
• High Optic Intensity Beam 0.5-Watt LED White Light
• Light Intensity: 40 Lumens
• Run Times: “High Beam”(10hrs); “Low Beam”(27hrs); “Flashing”(52hrs)
• Effective Range: Up to 500m (1600 ft)
• Water Proof Rating: IPX4 (Heavy Rain and Snow)
• Ideal Temp: -20 °C to +60 °C (-4 °F to +140 °F)

The post ORBIS® High Intensity Beam White Safety Light (ORBIS®-HIBW-460) appeared first on Hellberg Sales and Service.